The Teltonika RUTX50 is an Industrial 5G Router with embedded Quectel 5G Modem. This modem supports 5G NR Sub-6GHz and 4G LTE-Advanced Pro Cat 20 cellular radio connectivity. The modem uses 4×4 MiMo antenna technology to provide optimum 5G and 4G connectivity speeds and the modem is wired out to 4 x SMA connections on the rear of the unit.
The RUTX50 is supplied by Teltonika complete with 4 x elbow joint, 5G blade antennas which in many circumstances will provide suitable signal reception for 4G and 5G Internet connectivity.
In the event that the Teltonika is located indoors, in a position where there is a poor 4G or 5G signal, but there is a much better 5G / 4G signal close by, or even better, outdoors, then an external 5G antenna can be used with the RUTX50.
For most installations we recommend the Panorama DWMM4-6-60 Omni-Directional 4×4 MiMo 5G Antenna which has 7dBi Peak Gain and is supplied pre-terminated with 4 x 5m long antenna cables with SMA Male connectors than can screw directly to the 4 x SMA antenna ports of the Teltonika RUTX50 router.
This high gain 5G antenna can be installed indoors where there is a stronger signal and is also a weatherproof antenna so can be wall or pole mounted outdoors if that is where the optimum 5G signal is found.
Panorama DWMM4-6-60 Omni-Directional 4×4 MiMo 4G/5G Antenna
Panorama DWMM4-6-60-5SP Omni-Directional 5G Antenna 7dBi Peak Gain with 4 x 5m cables with SMA Male
- 4×4 MiMo Omnidirectional Antenna – Suitable for indoor or outdoor use with multiple mounting options (wall, desk and pole mounted)
- 4G/5G LTE Ready – Covers Wideband 600-6000MHz
- Weatherproof IP66 rated – Outdoor 5G Antenna
- Medium Gain Omnidirectional Antenna 7 dBi Peak Gain
The DWMM4-6-60 Antenna Provides a 4×4 MiMo Solution for Global 4G/5G Networks from 617-6000MHz.
Incorporating four separately fed ultra wideband elements in a single housing the Panorama DWMM4[G] is suitable for a huge range of fixed site and failover applications. The supplied mounting bracket enables simple wall mounting using the supplied screws and wall plugs and mast mounting using the supplied clamps.
The Panorama DWMM4-6-60-5SP 5G antenna can also be mounted with screws directly to non-conductive panels or internal walls or stood on a desk using supplied mounting feet. The omnidirectional radiation pattern allows easy placement of the antenna without requiring directional alignment.
The antenna is fitted with an integrated flame retardant CS32 cable (FR CS29 for GPS/GNSS) which minimises exposed connector joints and simplifies cable management for easy installation. and the model that we stock is the DWMM4-6-60-5SP which is pre-terminated with 4 x 5m long cables with SMA male connectors to screw directly to the majority of our 4×4 MiMo 5G routers such as the Proroute H685 5G Router and the RAPID NR550 5G Router.
DWMM4-6-60 Specification
| Electrical Data | |
| Typical VSWR | <2.5:1 |
| Peak Gain (dBi) | 7dBi |
| Max Input Power (W) | 10 |
| Pattern | Hybrid |
| Global Positioning Data | |
| Frequency Range (MHz) | 617-960 / 1427-6000 |
| Mechanical Data | |
| Available Colours | White |
| Length (mm) | 371 (14.6”) |
| Height (mm) | 221 (8.7”) |
| Operating Temperature | -40° / +85°C ( -40° / 185°F ) |
| Mounting Data | |
| Mounting Type | Wall, Mast, Desk Mount |
| Approvals Data | |
| IP Rating | IP66 |
The DWMM4-6-60 antenna provides 4×4 MiMo solution for global 4G/5G networks from 617-6000MHz. Incorporating four separately fed ultra wideband elements in a single housing the DWMM4 is suitable for a huge range of fixed site and failover applications.
The supplied mounting bracket enables simple wall mounting using the supplied screws and wall plugs and mast mounting using the supplied clamps. The antenna can also be mounted with screws directly to non-conductive panels or internal walls or stood on a desk using supplied mounting feet.
The omni-directional radiation pattern allows easy placement of the antenna without requiring directional alignment. The DWMM4G type is supplied with an integrated GPS/GNSS module with 26dB LNA gain and advanced filtering to combat noise.
The antenna is fitted with integrated flame retardant CS32 cable (FR CS29 for GPS/GNSS) which minimises exposed connector joints and simplifies cable management for easy installation.
DWMM4-6-60 – Product Variants
Please note that our standard stock item is the DWMM4-6-60-5SP – please contact us for prices and lead times of other variants.
| Part Number | Cable Length | 4G/5G | GPS/GNSS |
|---|---|---|---|
| DWMM4-6-60-5SP | 5m (16′) | SMA (m) | – |
| DWMM4-6-60-5FKJ | 5m (16′) | FAKRA D Jack | – |
| DWMM4-6-60-5NP | 5m (16′) | N (m) | – |
| DWMM4-6-60-05NJ | 0.5m (1.5′) | N (f) | – |
| DWMM4G-6-60-5SP | 5m (16′) | SMA (m) | SMA (m) |
| DWMM4G-6-60-5FKJ | 5m (16′) | FAKRA D Jack | FAKRA C Jack |
| DWMM4G-6-60-5NP | 5m (16′) | N (m) | N (m) |
| DWMM4G-6-60-05NJ | 0.5m (1.5′) | N (f) | N (f) |
Download Datasheet for DWMM4-6-60-5SP – CLICK HERE (PDF)
Industrial 5G Antennas for RUTX50 Router
If you need a more industrial style 5G antenna to use with the RUTX50 5G Router, then the Fullband FB4X4MIMO is a hole or wall mounted 5G dome antenna with excellent performance in a compact form.
4×4 MiMo 5G Antenna
The Fullband FB4X4MIMO 5G antenna gives outstanding performance when coupled with our range of 5G routers. With 4 x 5 meter cables it can handle 4 concurrent data streams.
- 6 dBi Peak Gain providing excellent performance for 5G routers that need 4×4 MiMo
- Pre-terminated with 4 x 5m cables with SMA Male connectors – suits connection to most 5G routers
- Supplied with installation accessories for Wall, Pole and hole mounting – covers most installation requirements
- Robust construction means it can be installed almost anywhere
Fullband FB4X4MIMO 5G Omni Directional External Antenna
Fullband frequency from 617MHz to 5925MHz (617-960, 1427-2690, 3300-5000 and 5150-5925 MHz)
- Covers all UK Frequencies for 5G, 4G LTE, 3G, 2G.
- Peak Gain 6dBi
- IP67
- Omni Directional 4G LTE and 5G
- Screw, pole and wall mount
The Fullband FB4X4MIMO-5G omni directional antenna is a high gain outdoor antenna designed to connect to our range of 5G Proroute routers. The FB4X4MIMO-5G is a Fullband Antenna which means that it works with all UK 2G, 3G, 4G and 5G mobile network frequencies so can be used with all of our 5G, 4G and 3G 3G routers.
- Frequency bands: 617-960, 1427-2690, 3300-5000 and 5150-5925 MHz
- MiMo: 4×4 MiMo
- Cables: 4 x 5 meter LL195
- Connectors: SMA male plugs
- Peak Gain: 6dBi
- Polarisation: Linear
- Impendance: 50 Ohms
- Input power: 35W
Dimensions: Ø96 x H130mm
Operating temperature: -40 °C to 85 °C
Antenna Radome ASA UV stable
Wall and pole mount kit included
Is the Teltonika RUTX50 a good router for home use?
You can read our blog post about whether the Teltonika RUTX50 router is a good choice for a home user compared to a consumer grade 5G router such as the Zyxel NR5101.
You can read the article by clicking here.